1/22/2024 0 Comments 12 volt water pump![]() The pump operates at a working pressure of 35 psi (2.4 bar) and will supply 12.5 litres of water a minute. The permanent magnet motor has a self-lubricating shaft. It is fitted with and internal bypass for inlet pressure control. The Europump can run dry without damage, has little to no vibrations and runs very quiet. Larger systems with mixer taps can also be affected by this phenomenal, so if your current pump pulsates when only the hot or cold tap is used but is fine when both are opened this pump could well help solve your problem. The 4-diaphragm system prevents the On / OFF pulsations that can occur when a tap is partially open. It is also easier to plumb in an entire water system having less wiring compared to a micro-switched system. This is great because it means you can use normal taps, not being restricted to ones with a microswitch. So, your water system in effect works similar to your household system. When you close your tap, the pump will automatically stop running holding a pressure in your pipework. This means it automatically senses the pressure drop when you open a tap and starts to run. All of the adapters are push fit with o-rings should you need to remove them easily in the future. Hose tail fittings are included as are 1/2″ male BSP terminations, which are standard threading’s for tap fittings. A fully sealed marine quality water pump that comes complete with an impressively sized water strainer. The Europump 12 pumps Manufactured by Osculati are an ideal replacement or new build part.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |